Follow

M1 Quickstart Guide

 

 

1. CONNECT POWERSHIFT™ BATTERY

Rotate the battery bay latch counter-clockwise. Lift and remove the bay door. 

 

Place the PowerShift Battery directly down into the battery bay. Align small hole at top of battery with post in battery bay. 

 

Gently slide battery back until engaged. The M1 LEDs will flash once. Replace bay door then press and turn latch clockwise until locked. Do not force door closed. 

 

2. POWERING ON / CHANGING MODES

To turn on RFLX Remote AND M1: Press and hold the power button on the RFLX Remote until you hear a tone and green LED turns on.

 

To cycle through modes: Triple click the Power Button on RFLX Remote. Tone and status LEDs will indicate each mode change.

 

Audible beep will sound and status LEDs will illuminate according to current mode. Repeat until you are in your desired mode.  

 

3. RIDE HAPPY

Note: Throttle control will not function without pressing the Ride Trigger. 

Press & hold the Ride Trigger, then push forward on the throttle control (away from your body).

 

Press & hold the Ride Trigger, then pull the throttle control backwards (toward your body).

 

Press & hold the Ride Trigger, then pull the throttle in the opposite direction of travel.

 

4. M1 BATTERY LIFE / POWERING OFF

To see the battery life of the M1: Double click the Power Button on the RFLX Remote. Status LEDs will illuminate according to remaining battery life. 

 

To turn off RFLX Remote AND M1: Press and hold the power button on the RFLX Remote for 2 seconds until you hear a tone.

INBOARD SUPPORT HOME

Download the M1 Quickstart Guide PDF:

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.