Follow

My M1 and RFLX remote don’t seem to be communicating, what do I do?

 

  1. Power cycle the M1. Unplug the PowerShift Battery from the M1, counting to “ten”, and then plug it back in again.
  2. Check that the PowerShift Battery is plugged into the M1 correctly and that the M1 is powered on (Headlights & Taillights flash on)
  3. Check the PowerShift Battery is charged. If not:
    1. Press the Power Gauge button on the battery, if none of the Power Gauge LED’s light up, it might need to be charged.
  4. Check that the RFLX Remote is charged. If not:
    1. Press & hold the Power button, if it doesn’t light up and beep, it might need to be plugged in and charged.
  5. You may need to Re-Pair the RFLX Remote with the M1. To force a Re-Pairing:
    1. Turn the RFLX Remote off
    2. On the powered on M1 do the pairing tap (Take Three fingers to the M1 Touch Sync Area, Tap the Touch Sync, Then Tap and hold three fingers). The lights should dim on the M1 to indicate this happened correctly.
    3. Now unplug the PowerShift battery and remove it from your M1. The M1 & RFLX remote will be completely powered off now.
    4. Now plug the PowerShift Battery back into the M1
    5. Turn-on the RFLX remote
    6. On the powered on M1 do the pairing tap again (Take Three fingers to the M1 Touch Sync Area, Tap the Touch Sync, Then Tap and hold three fingers). The lights should dim on the M1 to indicate this happened correctly.
Was this article helpful?
0 out of 5 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.