M1 Deck, RFLX Remote, PowerShift Battery, Power Charger
Covered by the following compliance standards:
Emissions: FCC: Part 15, Class B, Industry Canada, CE, LVD
Environmental: RoHS, WEEE, Level VI Power Compliance
Safety: cULus 60950-1, TUV/GS EN60950, UL1642, UN38.3, IEC/UL 62133
Bluetooth transmitter ID: FCC ID: QOQBT113, IC: 5123A-BGTBLE113
FCC Interference Statement (USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- For additional help visit support.inboardtechnology.com
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT: RADIATION EXPOSURE STATEMENT THIS EQUIPMENT COMPLIES WITH FCC RADIATION EXPOSURE LIMITS SET FORTH FOR AN UNCONTROLLED ENVIRONMENT. END USERS MUST FOLLOW THE SPECIFIC OPERATING INSTRUCTIONS FOR SATISFYING RF EXPOSURE COMPLIANCE. TO MAINTAIN COMPLIANCE WITH FCC RF EXPOSURE COMPLIANCE REQUIREMENTS, PLEASE FOLLOW OPERATION INSTRUCTIONS AS DOCUMENTED IN THIS MANUAL.
Industry Canada: This device complies with RSS-211 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT: RADIATION EXPOSURE STATEMENT THIS EQUIPMENT COMPLIES WITH IC RADIATION EXPOSURE LIMITS SET FORTH FOR AN UNCONTROLLED ENVIRONMENT. END USERS MUST FOLLOW THE SPECIFIC OPERATING INSTRUCTIONS FOR SATISFYING RF EXPOSURE COMPLIANCE. TO MAINTAIN COMPLIANCE WITH IC RF EXPOSURE COMPLIANCE REQUIREMENTS, PLEASE FOLLOW OPERATION INSTRUCTIONS AS DOCUMENTED IN THIS MANUAL.
European Union Notice: Radio products with the CE marking comply with the R&TTE Directive (1999/5/EC), the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following
- EN 60950-1 Product Safety
These products are designed to be compliant with the rules and regulations in locations where they are sold and will be labeled as required. These products are type approved — users are not required to obtain license or authorization before using.
This product has been certified as conforming to technological standards. Therefore the following actions are punishable by law:
- Disassembly or modification of the product
- Removal of identification labels on the back of the product
CAUTION: Changes or modifications to the device not expressly approved by Inboard Technology can void the user’s authority to operate the equipment.
The frequency used by this product is also used by industrial, scientific and medical devices, such as microwave ovens, as well as wireless detectors for motion detectors, such as those requiring licenses used on manufacturing lines or similar radio transmitters (all these wireless devices will be called “other wireless transmitters” below). Most modern electronic equipment, (e.g., in hospitals and cars), is shielded from RF energy. However, certain electronic equipment is not.
- Please ensure that all medical devices used in proximity to this device meet appropriate susceptibility specifications for this type of RF energy.
- In the unlikely event that there is electronic interference between this system and other wireless transmitters, quickly change the location of operation or stop operating the unit (cease signal transmission).
- If other electrical interference or related problems should occur, contact Inboard technical support at support.inboardtechnology.com.
Radio Frequency Interference Requirements
This device complies with part 15 of the FCC rules and Industry Canada Radio Standard RSS 211.
- 47 CFR PART 2, SUBPART J, PARAGRAPH 2.906, Part 15, Subpart B – Unintentional radiators: DoC of Class B Personal Computer Peripheral
- Industry Canada ICES-003: Information Technology Equipment (ITE) – Limits and Methods of Measurement
Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CE Marking & European Union Compliance
Products intended for sale within the European Union are marked with a CE Mark, which indicates compliance to applicable Directives and European Normes (EN), as follows:
Bluetooth Products: R&TTE Directive 1999/5/EC, Low Voltage Directives 73/23/EEC and 2006/95/ EC, EMC Directive 2004/288/EC
EN55022:210 - Information Technology equipment - Limits and methods of measurement of radio disturbance characteristics of ITE
EN55024:210 – Information Technology Equipment – Immunity Characteristics – Limits and Methods of Measurement
(EN 61000-4-2:2009) Electrostatic Discharge Immunity Test
(EN 61000-4-3:2010) Radiated, Radio-Frequency Electromagnetic Field Immunity Test
PRODUCT LIFE AND RECYCLING
This product should be recycled at the end of its useful life. All Inboard Technology models can be returned to the location at which they were purchased, or to Inboard Technology, Inc. by visiting support.inboardtechnology.com